Set of 2 Clear Glass Globe Pendant Lights with Adjustable Rod Mount

A matched pair of clear glass globe pendant lights hung on interchangeable metal rods rather than cords, intended for households fitting out a kitchen island or dining table who want two identical fixtures without buying twice. Each globe measures 7.3 inches across and takes a common E26 bulb, leaving the lamp itself visible through clear glass.

The pair ships with three 12-inch rods and one 6-inch rod per fixture, so drop height is set by how many sections you thread together rather than by cutting anything. A swivel adapter at the canopy lets both pendants hang plumb on a sloped or vaulted ceiling, which is the usual reason a globe pair looks off in older houses.

Specifications

Product Schema

Design Story

The globe is the oldest useful shade geometry in residential lighting, and it survives because a sphere distributes light evenly in every direction, including upward. Some of that upward light reaches the ceiling, which keeps the room from feeling bottom-heavy after dark.

Rod suspension was chosen over cord for this pair because rods hold a true vertical line and do not drift or curl over time, which matters when two fixtures are read against each other across an island. The shade opens at the bottom, so a bulb can be changed by hand without unhanging anything. The black rods and socket hold their finish against skin oils, while the gold canopy is the one deliberate flourish, visible mainly from across the room.

LIGHTEXP includes the swivel adapter as standard rather than as an add-on, because a sloped-ceiling install is common enough that treating it as a special case leaves too many pairs returned. The result reads vintage without leaning on faux-ageing or decorative filigree.

Where It Works Best

Two over a kitchen island, rods set to the same length. With both globes hanging at identical height and spaced about 24 to 30 inches apart, the pair reads as one deliberate composition rather than two lamps that happen to share a ceiling. Clear glass here means an ST64 or A19 filament bulb becomes part of the look, so match filament colour to your hardware: warm amber against brass pulls, white frosted against stainless. Islands of six feet take a pair comfortably. Sizing and spacing for rod hangs is covered in the Lighting Design Guides.

Flanking a bathroom vanity or a hallway mirror. Two globes at face height either side of a mirror give even light across both cheeks, which is why this arrangement is standard in older hotel bathrooms and still beats a single overhead bar. Use 6-inch rod sections only, keeping the fixtures tight to the ceiling if the room is narrow, and pair them with a stone countertop and unlacquered brass tapware where the gold canopy can pick up warm metal nearby. Installation height in wet-adjacent rooms should be checked against your local code.

In a small cafe or breakfast room. The pair works at commercial scale too: over a two-top or along a stair landing, clear globes throw enough light to read a menu or a handrail without hot spots, and replacement bulbs are whatever the nearest hardware store carries in E26. Set one longer than the other only where the ceiling steps, where the ceiling itself steps. The Design Inspiration & Ideas pages show globe fixtures used in both residential and small commercial rooms. Coordinating pieces sit in the Full Lighting Collection if you want the same glass elsewhere.

Take the pair home and set your own spacing from those three rod lengths.

Frequently Asked Questions

How difficult is it to install this pair?

Each fixture is hardwired to a ceiling junction box, and the rods thread together before the wiring is connected, so most of the work happens at floor level. Expect to use a screwdriver, wire nuts from the hardware pack, and a non-contact voltage tester; the swivel adapter attaches to the box first and the rods follow. Two fixtures over a standard island is a straightforward job for anyone comfortable turning off a breaker.

What bulbs fit, and can the pair be dimmed?

Each globe takes one E26 medium-base bulb at up to 60 watts, including LED, CFL, incandescent, and halogen types; the standardized base means replacements are easy to find for the life of the fixture. Bulbs are not included. The fixtures carry no dimming electronics, so dimming behaviour depends on choosing dimmable lamps paired with a compatible wall dimmer on the circuit.

What hanging lengths can I achieve, and will it work on a sloped ceiling?

Three 12-inch rods and one 6-inch rod per fixture combine to give several fixed lengths up to 42 inches of rod before the shade itself is counted, so you can match standard eight-foot ceilings or drop lower in a vaulted room. Rods are added rather than cut, so the length can be changed later. Yes, sloped ceilings are supported: the swivel adapter keeps each pendant hanging vertically regardless of ceiling angle.

How should the glass be cleaned?

Switch the fixture off and let the lamp cool, then wipe the globe with a lightly dampened microfibre cloth and dry it with a second cloth to avoid streaks. The kit includes cotton gloves for installation, and they are worth keeping for handling the glass later, since fingerprints show under every lit filament. Do not immerse the shade or let cleaner run into the socket.

How is the set shipped and how long does it take?

Orders are processed within 3-5 business days. Standard delivery takes 7-15 business days, shipped in protective foam-in-box packaging with tracking provided. Both glass globes travel in separate moulded cavities, and the rod packs are bagged so metal cannot scuff glass in transit.

What does the return policy and warranty cover?

30-day returns on unused items in original packaging, so keep the carton until both fixtures are installed and you are happy with the drop height. The 24-month warranty covers structural components and the light module, including canopies, rods, swivel adapters, and sockets, against defects in materials and workmanship under normal residential use.